ISO TR 8713:2019 pdf free.Electrically propelled road vehicles -Vocabulary.
3 Terms and definitions
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1 acceleration ability (vi to v2)
shortest time required to accelerate the vehicle from speed vi to speed v2
Note ito entry: Master publication in ISO/TC 22/SC 37: ISO 8715:200 1.
3.2 alignment
relative position of primary to secondary device
Note ito entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:2017.
3.3 alignment check
confirmation that the primary and secondary devices are properly positioned relative to each other
Note ito entry: Proper positioning is done to assure sufficient system functionality (e.g. system efficiency, EMF/ EMC limits, safety requirements etc.).
ISOURCE: IEC 61980-2 1
Note 2 to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:20 17.
3.4 applicable driving test ADT
single driving test schedule which is specified for each region
EXAMPLE Chassis dynamometer test cycle for light-duty vehicles in Japan (JCO8), New European Driving Cycle (NEDC), Urban Dynarnometer Driving Schedule (UDDS).
Note ito entry: Master publication in ISO/TC 22/SC 37: ISO 23274-2:2012, also defined in ISO 23274-1:2013 and ISO 23828:20 13.
3.5 auxiliary electric system
vehicle system, other than for vehicle propulsion, that operates on electric energy
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:2018, also defined in ISO 6469-2:2018 and ISO 6469-4:2015.
3.6 balance of electric circuit
remaining section of an electric circuit when all electric power sources that are energized (RESS and fuel cell stacks) are disconnected
Note ito entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:20 18, also defined in ISO 17409:20 15.
3.7 basic insulation
insulation of hazardous live parts which provides basic protection
Note ito entry: This concept does not apply to Insulation used exclusively for functional purposes. Note 2 to entry: Where insulation is not provided by solid insulation only, it is complemented with protective
barriers or protective enclosures to prevent access to live parts in order to achieve basic protection. [SOURCE: IEC 60050-195:1998, 195-06-06, modified — “hazardous-live-parts” written as “hazardous live parts9
Note 3 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:2018, also defined in ISO 17409:2015 and ISO/PAS 19363:20 17.
3.8 basic protection
protection against electric shock under fault-free conditions
(SOURCE: IEC 60050-195:1998, 195-06-011
Note ito entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:2018.
3.9 battery control unit BCU
electronic device that controls, manages, detects or calculates electric and thermal functions of the battery system and that provides communication between the battery system and other vehicle controllers
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 12405-4:2018.
3.10 battery pack
energy storage device that includes cells or cell assemblies normally connected with cell electronics, power supply circuits and overcurrent shut-off device, including electrical interconnections, interfaces for external systems
Note 1 to entry: Examples of external systems are cooling, voltage class B, auxiliary voltage class A and communication.
Note 2 to entry: Master publication in ISO/TC 22/SC 37: ISO 12405-4:2018.
3.11 battery system
energy storage device that includes cells or cell assemblies or battery pack(s) as well as electrical circuits and electronics
Note 1 to entry: Battery system components can also be distributed in different devices within the vehicle.
Note 2 to entry: Examples of electronics are the BCU and contactors.
Note 3 to entry: Master publication in ISO/TC 22/SC 37: ISO 12405-4:2018, also defined in ISO/PAS 19363:2017.
3.12 bus vehicle designed and constructed for the carriage of passengers, comprising more than eight seats in addition to the driver’s seat, and having a maximum mass exceeding 5 t
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-1:—i).
3.13 capacity total number of ampere-hours that can be withdrawn from a fully charged RESS under specified conditions
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 64691:_2). also defined in ISO 12405-4:2018.ISO TR 8713 pdf download.